WS-7044U Wireless 433 MHz Miniature Wood Weather Station Instruction Manual
10I. INDOOR TEMPERATURE The Weather Temperature Station monitors the temperature within its immediate proximity, and displays this temperature in
11There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny—indicates that the weather is expected to improve (not that t
12change in order from: “sunny” to “sun with clouds” to “clouds with rain,” or the reverse. It will not change from “sunny” directly to “rainy,” alt
13 III. OUTDOOR TEMPERATURE—WITH MINIMUM & MAXIMUM FEATURE The Weather Temperature Station receives the outdoor temperature from the Remote Temp
14A. VIEWING THE MINIMUM/MAXIMUM TEMPERATURES 1. Press the circular MIN/MAX button (under all LCD displays) once. An arrow will appear and point
15B. RESETTING THE MINIMUM/MAXIMUM TEMPERATURE 1. Press and hold the MIN/MAX button for 3 seconds. This will reset all records to the current out
16desired location, and wait approximately 10 minutes before permanently mounting to ensure that there is proper reception. The Weather Temperature
17into the mounting surface. 4. Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket. 5. Snap the R
18 II. THE WEATHER STATION The Weather Station can be mounted on the wall with the use of a wall hanging screw (not included). A. WALL MOUNTIN
19 2) Place sensor closer to station. 3) Be sure there are no obstructing objects. 4) Be sure all batteries are fresh. Problem: The LCD screens
2TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 Quick set-up guide 3 Battery installation 4-6 Time 7-8 Features: 9-15
20MAINTENANCE AND CARE INSTRUCTIONS • Extreme and sudden temperature changes, vibration, and shock should be avoided to prevent damage to the units
21SPECIFICATIONS Temperature measuring range Indoor: 32°F to 104°F with 0.2°F resolution: (0°C to 40°C with 0.1°C resolution). “OFL” displayed if o
22 Power Source Weather Station: 2 x AAA, 1.5V (IEC LR3) Sensor: 2 x AAA, 1.5V (IEC LR3) Dimensions (L x W x H) Weather Station: 2.95 x 0.83 x 10in.
23 La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned part
24Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (
25La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: [email protected] (warranty work) [email protected] (inf
3INVENTORY OF CONTENTS 1. WS-7044U—Weather Station. 2. TX2U—Remote Temperature Sensor. 3. Three each, ½” Philips screws. 4. One strip double-sid
4DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cover. Place your thumb over the two air-ven
5 B. WEATHER TEMPERATURE STATION 1. Remove the battery cover. Pull up and out from the slot located in the central position of the battery cover.
6and install them again—carefully observing the polarity. C. LOW-BATTERY & BATTERY REPLACEMENT FEATURES When the batteries become weak in th
7 II. TIME A. THE TIME DISPLAY The time is displayed vertically (with the hour displayed above the minutes) rather than in the conventional horiz
8the HOUR LCD will flash. Press the + button (repeatedly) until you reach your desired hour. 2. Press the SET button a second time. The minute dig
9 FEATURES Note: All temperatures are read in °F, there is no option to read the temperature in °C. HOUR LCD MINUTE LCDINDOOR LCD FORECAST LCDOUTD
Comments to this Manuals