La Crosse Technology WS-7076U User Manual

WS-7076U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual

10 6. Press and release the “SET” button to confirm and advance to the Time setting mode. V. TIME There are two methods by which the time can be

115. Press and release the “SET” button to confirm the hour setting and to advance to the minute setting mode. 6. The minute digits should be flas

125. The numeric-month will be flashing in the DATE LCD. Press and release the “CH” button to select to the current month. 6. Press and release th

13VIII. SETTING THE LCD CONTRAST 1. Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD. 2. Press and r

14FEATURES OF THE WS-7076U I. BACK LIGHT The WS-7076U has a backlight that can be activated by pressing any of the eight function buttons. Afte

15IV. MINIMUM AND MAXIMUM TEMPERATURE RECORDS The WS-7076U keeps a record of the MINIMUM and MAXIMUM temperature and the time and date of their occ

16C. RESETTING THE MIMIMUM AND MAXIMUM RECORDS 1. All the indoor records (minimum and maximum) will be reset after the “IN” button is pressed and

177. To set, activate and deactivate alarm 2, follow the directions above for alarm 1—using the “AL2” button instead of the “AL1” button. The ((2))

18 A. SET-UP OF MULTIPLE UNITS 1. It is necessary to remove the batteries from all units currently in operation. 2. Remove the battery covers

19 MOUNTING Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Al

2 Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5 Detailed Set-Up

201) With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting sur

21 TROUBLESHOOTING Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure indoor weather station is at least

22• Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. SPECIFICATIONS Tempe

23La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limi

24PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH. This warranty gives you specific legal rights. You may also have o

3 INVENTORY OF CONTENTS 1. The weather station (Figure 1). 2. One TX6U remote temperature sensor with mounting bracket (Figure 2). 3. Th

4ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is lo

5QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temp

6DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the mounting bracket. The bracket snaps on and off

7PROGRAM MODE Programming Note: If 30 seconds are allowed to pass or either the IN or the OUT button is pressed during programming modes, the unit w

8II. FUNCTION KEYS The function keys are operated by pressing the top or bottom of the key corresponding to the operation that you want to perform

94. Select your appropriate time zone using the “CH” button. During selection of the Time Zone, the 3 letter abbreviations for the time zones found