1
INTRODUCTION:
The Wireless Color Forecast Station features atomic time, weather forecast, indoor and outdoor
temperature/humidity as well as heat index and dew point, on a stylish, colorful, and easy to read display.
Use the integrated USB charging port to charge your devices when the display is plugged into a power
outlet.
Wireless Color Forecast Station:
OUTDOOR TEMPERATURE/HUMIDITY TRANSMITTER: TX14TH
Wireless Color Forecast Station
Model: 308-146
Time
Date
Week Day
Outdoor readings:
Temperature
Humidity
Heat Index
Dew Point
MIN/MAX
Snooze/Light button
Forecast icons:
Sunny
Partly Sunny
Cloudy
Rainy
Stormy
(All icons are
shown in this
illustration)
Indoor readings:
Temperature
Humidity
Heat Index
Dew Point
MIN/MAX
2
TABLE OF CONTENTS:
INTRODUCTION 1
FORECAST STATION 1
OUTDOOR TEMPERATURE
HUMIDITY TRANSMITTER TX14TH 1
INVENTORY OF CONTENTS 3
FEATURES 3
INITIAL SETUP 3
POWER THE FORECAST STATION 4
A/C ADAPTER 4
BATTERIES 4
INSTALL BATTERIES IN THE OUTDOOR TRANSMITTER 4
WWVB RADIO CONTROLLED TIME 5
WWVB RECEPTION ICON 5
MANUAL SIGNAL SEARCH 5
FUNCTION BUTTONS 5
PROGRAM MENU 6
WWVB RECEPTION ON/OFF 6
TIME ZONE 6
DAYLIGHT SAVING TIME INDICATOR 7
12 OR 24 HOUR TIME FORMAT 7
SET TIME 7
SET CALENDAR 7
FAHRENHEIT/CELSIUS 7
LARM SET 8
DEACTIVATE ALARM 8
SNOOZE 8
USB CHARGE PORT 8
CHARGE A DEVICE 8
BACKLIGHT 9
A/C ADAPTER 9
BATTERIES 9
WEATHER FORECAST ICONS 9
LCD SCREEN 10
MIN/MAX TEMPERATURE/HUMIDITY DATA 10
VIEW 10
RESET 10
HEAT INDEX 11
DEW POINT 11
OUTDOOR TEMPERATURE
HUMIIDTY FLASHES 11
LOW BATTERY ICON 11
USE MULTIPLE TRANSMITTERS 12
CHANNEL SCROLL 12
OTHER FORECAST STATION ICONS 12
CARE AND MAINTENANCE 13
POSITION OUTDOOR TRANSMITTER 13
POSITION FORECAST STATION 13
SPECIFIC
TIONS 14
CCURACY 14
INDOOR TEMPERATURE 14
INDOOR HUMIDITY 14
OUTDOOR TEMPERATURE 14
OUTDOOR HUMIDITY 15
BAROMETRIC PRESSURE 15
WARRANTY 15
FCC 16
3
INVENTORY OF CONTENTS:
1. 308-146 Forecast Station
2. 5.0 volt a/c adapter cord for Forecast Station
3. Wireless Outdoor Transmitter TX14TH
FEATURES:
• ATOMIC time and date (auto sets)
• 12/24 hour time with snooze alarm and alarm icon
• Charge devices with USB charging port
• Calendar display: month, day, date
• Heat index and dew point
• Color forecast: sunny, partly sunny, cloudy, rainy and stormy
• 12 hour forecast based on changing barometric pressure
• IN / OUT temperature (°F / °C)
• IN / OUT humidity (%RH)
• MIN / MAX records (24-hour readings)
• Time zone selection: Atlantic Time (AST), Eastern Time (EST), Central Time (CST), Mountain Time
(MST), Pacific Time (PST), Alaskan Time (AKT) and Hawaiian Time (HAT)
• Light up the Forecast Station with a press of a button using battery power OR continuous light using
the AC adapter with ON / OFF option
• LCD light dimmer for nighttime use
• Low battery icon for Forecast Station and sensor
• Sits on desktop or tabletop
• 3 "AA" Alkaline batteries (not included) OR optional 5.0V AC adapter (included)
INITIAL SET UP:
1. Insert A/C adapter into the wall outlet then into the Forecast Station or insert 3 AA batteries (not
included) into the Forecast Station (see Power the Forecast Station). The Forecast Station will light
up and show, indoor temperature, humidity and channel 1.
2. Insert 2 fresh AA batteries into the transmitter, observing the correct polarity (see Install Batteries in
the Outdoor Transmitter).
Note: The CH switch is set to Channel 1 by default. Confirm channel 1 is selected.
3. Keep the transmitter 5-10 feet from the Forecast Station for 15 minutes to establish a good
connection.
4. Within 3 minutes the station will beep and the outdoor temperature should be displayed on the Atomic
Clock. If the outdoor temperature is not displayed after 3 minutes remove power from the transmitter
and the Forecast Station for 60 seconds and start again from step 1.
5. For optimum 433 MHz transmission, the outdoor transmitter should be placed a distance of no more
than 200 feet (60 meters, open air) from the Forecast Station.
IMPORTANT: When operating on a/c power, to avoid interference, the backlight and USB charge port
will turn off while the Forecast Station searches for the WWVB signal. The backlight and USB charge port
resume after a 2-10 minute search.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
4
POWER THE FORECAST STATION:
The clock can be powered by the 5-volt a/c adapter or batteries.
A/C power adapter:
Insert enclosed 5-volt a/c power adapter into a wall outlet, then into the Forecast Station.
Batteries:
1. Remove battery cover: Slide tab to the right and pull out to remove battery cover.
2. Install three fresh AA batteries according to the polarity markings.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Lithium, Standard, or Rechargeable Batteries
If the Forecast Station does not show indoor temperature after 60 seconds, remove adapter and
batteries, and wait for at least 60 seconds before repeating the setup process.
INSTALL BATTERIES IN THE OUTDOOR TRANSMITTER:
1. Slide the battery cover down, then lift off the back of the transmitter.
Note: Be careful not to break the tabs on the battery cover.
2. Confirm the channel selector switch is on channel 1.
3. Insert two fresh AA batteries into the transmitter. Observe the correct
polarity (see marking inside battery compartment).
4. Keep transmitter 5-10 ft. from the Forecast Station during setup.
5. After 15 minutes, if the outdoor temperature shows on the Forecast
Station, you can move the outdoor transmitter outside to a shaded
location within range of the Forecast Station.
Battery
Compartment
5-Volt a/c adapter
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals