WS-7391U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual
10II. Time Setting Note: This is only necessary if you do not wish to wait for the WWVB reception. All manual set data will be over-ridden by the re
113. Press and release the “+” button to select your desired time zone. The TIME LCD displays the 3 letter abbreviations for the time zones found
12Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time. 5. Press and release the “SET” button to confirm and adv
1311. Press and release the “SET” button to confirm the year and to advance to °F and °C selection (skip step 1 and 2 in section VI if continuing).
14FEATURES OF THE WS-7391U I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate. By adjusting the sensitivity settin
15then the weather has not changed or the change has been slow and gradual. If this happens on a regular basis, it may be necessary to adjust the wea
16III. Outdoor Temperature and Humidity The outdoor temperature and humidity is viewed in the OUTDOOR LCD. When there is more than one remote senso
17V. Adding Additional Remote Sensors (Optional) The WS-7391U is able to receive signals from 3 different remote sensors. These extra remote sensors
18VII. Viewing and Operating with Multiple Remote Sensors 1. To view the temperature of a different remote sensor press and release the “CHANNEL” b
19VIII. Mounting Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location
2TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5-6 Detailed Set-Up Guide Battery Insta
205. Remove screws from the mounting surface. 6. Align the mounting bracket with the started screw holes. 7. Screw mounting bracket onto the mounting
212. The Indoor Weather Station 1. The WS-7391U is a wall mount only indoor weather station. To mount the display on your wall: 2. Fix a screw (not
22Troubleshooting Problem: No reception of WWVB time signal Solution: 1) Wait overnight for signal. 2) Be sure indoor weather station is at least 6
23Maintenance and Care Instructions • Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • Clean display
24reception (indoor weather station) Transmission Range 80 feet (in open space) Power Supply Indoor weather station 2 x AA Remote thermo/hygro sens
25ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this war
26This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of co
3INVENTORY OF CONTENTS 1. The indoor weather station 2. Remote temperature sensor (model TX4U) 3. Instruction manual and warranty card ADDITIONA
4ABOUT WWVB The NIST (National Institute of Standards and Technology—Time and Frequency Division) radio station, WWVB, is located in Ft. Collins, Col
5QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote ther
6To complete the set up of your indoor weather station after the 10 minutes have passed please follow the steps in the Detailed Set Up Guide . Note:
7DETAILED SET-UP GUIDE BATTERY INSTALLATION A. Remote Thermo/hygro Sensor 1. Pull the cylindrical rain cover off the remote thermo/hygro sensor.
8is achieved easiest at night), it will display the correct time (factory setting is Eastern time zone). PROGRAM MODE Programming Note: If 20 seco
92) Manually (performed throughout the programming mode. When programming, the manual setting of time and date is not necessary and can be skipped.
Comments to this Manuals