La-crosse-technology WS-7014U User Manual download pdf (Page 5)

DETAILED SET-UP GUIDE

I. BATTERY INSTALLATION

A. REMOTE CONTROL SENDER

1. Remove the mounting bracket. The

bracket snaps on and off easily.

2. Remove the battery cover, by sliding the

cover down.

3. Observing the correct polarity install 2

AA batteries. The batteries will fit tightly

(to avoid start-up problems make sure

they do not spring free).

4. Replace the battery cover by sliding upwards. Be sure battery

cover is on securely.

B. WEATHER STATION

1. Remove the battery cover. To do

this, insert a solid object in the space

provided at the lower-central position

of the battery cover, then push up and

pull out on the battery cover.

2. Observe the correct polarity, and

install 2 AA batteries.

3. Replace the battery cover.

Note:

Immediately after the batteries have been installed, the

LCD (Liquid Crystal Display) will flash, and a tone will sound.

Within a few seconds the indoor temperature, indoor relative

humidity, and the weather icons (sun and clouds) will be

displayed. If not, remove batteries for 10 seconds and reinstall. If

the outdoor temperature is not displayed within four minutes,

remove batteries from both units, wait 10 seconds, and reinstall

making sure to install batteries into the sensor first. The time will

show -:-- and start searching for the signal. If it successfully

receives the time signal (usually at night), it will display the

Battery

Cover

Battery

Cover

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

La-crosse-technology WS-7014U User Manual Page 5