La-crosse-technology WS-9075U User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 18
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
QUICK SET-UP GUIDE
Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.
1. Have the indoor weather station and remote temperature sensor 3 to 5 feet apart.
2. Batteries should be out of both the indoor weather station and remote temperature sensor units for 10
minutes.
3. Place the batteries into the remote temperature sensor first then into the indoor weather station.
4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
In this time the indoor weather station and remote temperature sensor will start to talk to each other and the
display will show the indoor temperature/humidity, and outdoor temperature. If the indoor weather station does
not display all information after the 15 minutes please retry the set up as stated above. After all information has
been displayed for 15 minutes you can place your sensors outdoors and set your time.
Important Notes on Set-up and Operation
The remote temperature sensor should be placed in a dry, shaded area.
Fog and mist will not harm your remote temperature sensor but direct rain must be avoided.
The remote temperature sensor has a range of 330 feet. Any walls that the signal will have to pass through
will reduce distance. An outdoor wall or window can have up to 30 feet of resistance and an interior wall
can have up to 20 feet of resistance. Your distance plus resistance should not exceed 330 ft. in a straight
line.
The remote temperature sensor transmits a signal every minute. After the batteries have been installed, the
indoor weather station will search for the signal for a duration of 4 minutes. If there is no temperature
reading in the OUTDOOR LCD after 4 minutes, make sure the units are within range of each other, or
repeat the battery installation procedure.
If a button is pressed before the indoor weather station receives the signal from the remote temperature
sensor, you will need to follow the battery installation procedure again.
To complete the set up of your new wireless weather station after the 15 minutes have passed please follow the
steps that follow in the Detailed Set-Up Guide.
Page view 3
1 2 3 4 5 6 7 8 9 ... 17 18

Comments to this Manuals

No comments