La-crosse-technology WS-8035 User Manual

WS-8035 Wireless 433 MHz Wireless Weather Station Instruction Manual

106. Press and release the “SET” button to confirm the 12/24-hour time mode setting and continue to the Hour setting G. Setting The Hour Manually

116. Press and release the “SET” button to confirm the month and continue to the Date setting. K. Setting The Date Manually 1. Press and hold the

126. Press and release the “SET” button to confirm the relative pressure setting and continue to the Forecast Sensitivity setting. O. Forecast Sens

13FEATURES AND OPERATIONS A. Time Alarm Setting and Operation 1. To set the time alarm: a. Press and hold the ALM/DATE button for 5 seconds. b.

14 B. Moon Phase 1. There are 12 moon phases shown on the indoor weather station; the white portion signifies the portion of the moon visible in t

152. Outdoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum outdoor temperatu

16d. In sequential order, install batteries following the same battery installation procedures seen in Detailed Set-Up Guide section of this manual.

171. Weather Icons a. There are 3 possible weather icons that will be displayed at various times in the center of the indoor weather station. i Su

18H. Barometric Air Pressure Reading 1. The actual barometric air pressure is displayed directly under the weather forecast icon 2. The relative

19VII. MOUNTING Note: Before permanently mounting, ensure that the indoor weather station is able to receive signals from the sensors and WWVB sign

2TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set Up Guide 4 Detailed Set Up Guide

202. Mounting with Adhesive Tape a. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure

21 Maintenance and Care Instructions A. Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. B. Clean disp

22TROUBLESHOOTING Problem: The LCD is faint. Solution: 1) Set the LCD contrast to a higher level. 2) Replace batteries. Problem: No outdoor temper

23SPECIFICATIONS Indoor weather station recommended operating temperature 32°F to 122°F (0°C to 50°C) LCD contrast 8 levels (0-7) Temperature measu

24WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and wo

25For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax

3INVENTORY OF CONTENTS 1. WS-8035—indoor weather station 2. TX4U—remote thermo/hygro (temperature/humidity) sensor 3. Instruction manual and war

4QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote ther

5DETAILED SET-UP GUIDE I. Battery Installation Batteries will fit tightly. To avoid start-up problems, make sure that the batteries do not spring

6II. Start Up Sequence A. Initial Start 1. Immediately after the batteries have been installed, the indoor weather station will sound a “beep”, a

7III. Explanation of LCD Information A. The below picture highlights the LCD features. B. There are many di

8IV. Function Key Layout A. The below picture shows the six function keys used in programming and operation of your indoor weather station V

95. Press and release the “+” button to select the desired time zone. 6. Press and release the “SET” button to confirm the Time Zone setting and co