La-crosse-technology WS-9035U User Manual

WS-9035U Wireless 433 MHz Radio-controlled Weather Station Instruction Manual

10 XII. SETTING THE FORECAST SENSITIVITY Note: The forecast sensitivity can be adjusted to allow for areas that have a higher or lower sensitivity

11 I. WEATHER FORECAST The weather forecasting feature is estimated to be 75% accurate and is for the next 12 to 24 hours. The weather foreca

12 A. VIEWING THE INDOOR TEMPERATURE RECORDS 1. Press and release the IN/HR button once. “MAX” appears to the right of the indoor temperature, in

13 V. MOON PHASE There are 12 moon phases shown on the indoor weather station; the black portion signifies the portion of the moon visible in

14wind speed of that time being displayed. The gust display is the highest gust for the last 128-second period. To view the current wind ch

15 Wind Speed Beaufort Number or Force mph km/hr knots Description Effects Land / Sea 0 <1 <1 <1 Calm Still, calm air, smoke w

16difficult. Moderately large waves with blown foam. 9 47-54 mph 75-88 kph 41-47 knots Strong Gale Slight damage occurs to buildings, shingles ar

173. When the day and date are showing in the DATE LCD the alarm is deactivated. To activate the snooze: 1. While the alarm is sounding press and

184) Fasten the two nylon straps securely around the mounting location. II. THE REMOTE WIND SPEED SENSOR The remote wind speed sensor

19 TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology. Problem: No reception of WWVB time signal. Solut

2TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery install

20 MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • Clean disp

21Dimensions (H x W x D): Indoor weather station: 9” x 4.62” x 1.25” (227 x 117.4 x 31.2 mm) Remote temperature/humidity sensor: 5.4” x 2.25” x 2.25

22WS-9035U 081703 All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electr

3INVENTORY OF CONTENTS 1. The WS-9035U weather station (Figure 1). 2. One TX8U remote temperature/humidity sensor (Figure 2). 3. One TX15U wind

4QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station, remote tempera

5DETAILED SET-UP GUIDE BATTERY INSTALLATION The first step to powering up the weather station is to insert the connector (RJ11) at the end of the w

6PROGRAM MODE Programming Note: If 30 seconds are allowed to pass, or the WIND/SNZ button is pressed during the programming mode, the unit will conf

7Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest. 3. Press and release the ALM/+ button to

8VII. 12 OR 24 HOUR TIME SETTING 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in the TIME LCD and the number setting will

9IX. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will also set the date and day. The reception of the signal will override