La-crosse-technology WT-5442 User Manual

WT-5442 with TX6 Transmitter 433 MHz Radio Controlled Projection Alarm Instruction Manual 1

C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged into an AC outlet, the projection alarm can continuously project the time and/or re

F. REMOTE TEMPERATURE 1. The projection alarm comes with a remote temperature sensor. When set up properly, the projection alarm will receive and di

2. ACTIVATING/DEACTIVATING THE ALARM a. After entering the alarm-setting mode, the alarm is activated (either ALM1 or ALM2). b. To toggle between a

2. WEATHER ICONS There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny—indicates that the weather is expected to i

MAINTENANCE & CARE V. A. Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. B. Clean displays and uni

TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batteries

SPECIFICATIONS FOR WT-5442 Temperature: Measuring range: 32°F to 122°F with 0.2°F resolution (indoor) -21.8°F to 140°F with 0.2°F resolution (outdoor)

17WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology immediately upon discovery of

TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 2 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Instal

FEATURES OF PROJECTION ALARM Operation of these features are in section III. 1. Radio-controlled time and date 2. Projection of time and/or remote

Note: When using the AC adaptor, plug into the projection alarm first and then into the electrical outlet (this will help avoid pressing any buttons

B. PROJECTION ALARM 1. Remove the battery cover. 2. Observe the correct polarity, and install 3 AA batteries. 3. In addition or instead of insert

A. PROGRAMMING SEQUENCE Default (Factory) Setting 1. Time Zone Setting -5 (eastern standard time) 2. Daylight Saving Time ON/OFF ON 3. Adjusta

D. DST (DAYLIGHT SAVING TIME) SETTING Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight

5. Press and release the “SET” button to confirm the time setting, and to advance to manually set the date. G. DATE SETTING Note: When the WWVB signa

FEATURES & OPERATIONS III. A. FEATURES 1. Radio-controlled time and date 2. Projection of time and/or remote temperature 3. EL backlight 4. S