La Crosse Technology WT-5720 User Manual

WT-5720 Radio Controlled Projection Alarm Instruction Manual 02' (

10FEATURES & OPERATIONS A. Features 1. Radio-controlled time and date 2. Projection of time 3. LCD light 4. Six modes of date/seconds/tempera

11C. Projection of Time 1. When plugged into an AC outlet, the projection alarm can continuously project the time. 2. When operating on batteries

12F. Time Alarm The projection alarm has two separate alarms for time, “ALM1” and “ALM2”. The alarms have a different sound; ALM1 increases in vol

13G. Changing the Display Mode (Day, Seconds, and Temperature) There are six possible display modes to view the day, seconds, and temperature. To

14II. MAINTENANCE & CARE 1. Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. 2. Clean displays and

15TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change intensity setting 2) Use AC adapter 3) Darken surroundings 4) Use fresh batte

16SPECIFICATIONS FOR WT-5720 Temperature: Measuring range: 32°F to 122°F with 0.2°F resolution (indoor) (0°C to 50°C with 0.1°C resolution) Checking

17WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and w

18For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fa

2TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Insta

3INVENTORY OF CONTENTS 1) WT-5720 projection alarm 2) AC adapter/transformer 3) Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not

4QUICK SET-UP GUIDE 1) Insert two AA batteries into the projection alarm and/or plug into wall. Note: Do not press any buttons until the WWVB ti

5DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. Projection Alarm 1. Remove the battery cover. 2. Observe the correct polarity, and install

6II. PROGRAM MODE To enter the Program Mode, hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower right

75. From –5h to –8h a US map with the highlighted time zone will also be displayed to the right of the time display. 6. Press and release the “SET

85. Press and release the “SET” button to confirm the snooze setting and to advance to manually set the time. F. Time Setting Note: When the WWVB

9H. 12/24-Hour Setting Note: Setting to the 24-hour mode (also known as Military Time) will also change the temperature to display in °C instead o